HARDENED & TEMPERED STRIP STEEL

Carbon tool steel product Carbon steel product Alloy tool steel product Spring steel product

Carbon tool steel product

SK-2(SK120M) -

Razor blade, Cutlery
SK-3(SK105M) -

Hack saws, Cutlery, Springs
SK-4(SK95M) -

Measuring tape, Razor blade, Springs, Cutlery,
Knitting needles
SK-5(SK85M) -

Gauges, Springs, Cutlery, Clutch parts, Band saw and
Hack saw, Circular saws
SK2MCR4 -

Razor blades, Cutlery

Carbon steel product

S30CM -

Retainers
S35CM(SAE1035) -

Office-equipment parts, Friction plates
S45CM(SAE1045) -

Clutch parts, Chain parts, Retainer, Washers
S50CM(SAE1050) -

Safety shoes, Measuring tape, Chain parts, Springs,
Clutch parts, Washers, Safety buckles
S55CM(SAE1055) -

Safety buckles, Springs, Can openers, Thomson blades
S60CM(SAE1060) -

Chain part, Woodworking tool part, Springs
S65CM(SAE1065) -

Safety shoes, Clutch parts, Springs, Washers
S70CM(SAE1070) -

Washers, Hand saws for woodworking,
Office-equipment parts, Springs
S75CM(SAE1074) -

Circlips, Horn Diaphragm, Clucth parts, Washers, Springs

Alloy tool steel product

SKS-5M -

Cutlery, Round saws, Band saws for woodworking and lumbering
SKS-51M -

Cutlery, Round saws, Band saws for woodworking and lumbering

Spring steel product

50CRV4(SUP10) -

Machinery springs. Torsion bar

Strip Steel for Automobile Industry Strip Steel for Saw Blade/Others Shaving Strip Steel

Strip Steel for Automobile Industry

Specification

SPEC
THICKNESS	0.1 ~ 4.0 mm
WIDTH	5.0 - 450 mm
HARDNESS	HV 300 ~ 600
STRUCTURE	Bainite, Tempered Martensite
HARDNESS TOLERANCE	± HV 20 (Special ± HV 10)
STRAIGHTNESS	Max 0.5mm / 1,000 mm length
CROSS CAMBER	Max 3μm / mm Width (Special Max 1μm/ mm Width)
SURFACE COLOR	Unpolished blue, Bright, Polished blue, Polished white, Polished yellow
EDGE FINISH	Slit edge, Deburred edge, Round edge, chamfered edge, Square edge
INNER DIAMTER	MIN. 300 ~ 600mm
OUTER DIAMETER	MAX. 1,800mm

Application

Strip Steel for Saw Blade/Others

Specification

SPEC
THICKNESS	0.1 ~ 4.0 mm
WIDTH	5.0 - 450 mm
HARDNESS	HV 300 ~ 600
STRUCTURE	Bainite, Tempered Martensite
HARDNESS TOLERANCE	± HV 20 (Special ± HV 10)
STRAIGHTNESS	Max 0.5mm / 1,000 mm length
CROSS CAMBER	Max 3μm / mm Width (Special Max 1μm/ mm Width)
SURFACE COLOR	Unpolished blue, Bright, Polished blue, Polished white, Polished yellow
EDGE FINISH	Slit edge, Deburred edge, Round edge, chamfered edge, Square edge
INNER DIAMTER	MIN. 300 ~ 600mm
OUTER DIAMETER	MAX. 1,800mm

Microstucture

Fully spheroidized pin-point carbides
Free of carbide network or lamellar pearlite and free of carbide alignment, uniformly distributed in a ferrite matrix.
Carbide size is less than 1 micron diameter, maximum carbide is not exceed 3 microns, carbide spacing shall not exceed 4microns.

Application

Shaving Strip Steel

Edge finishing the right edge for every application

All kind of edge customer requirement, we can shave it precisely in the strip edge-deburred, round, chamfered, square, bevel shaved, bevel shaved +High frequency etc.
On request we can meet edge geometry of our strip steels exactly, so that customer uses it in their application, such as band saw, steel rule, rotary rule, springs etc.
We can also use our shaving machines to prepare the edge for final finishing on customer requirement.

SPEC
FINISH TYPE	DEFINITION	APPLICATION
Slit edge	sharp edged with slitting burrs left on	left spring
Deburred edge	slit edges from which burrs have been removed	left spring
Round edge	edged rounded	power spring
Chamfered edge	square edge with round corner	saws and blades
Square edge	sharp-cornered square edges	band saws
Bevel shaved edge	sharp-bevel	rotary rule
Bevel shaved edge + High frequency	sharp-bevel with high frequency of edge	rotary rule

Available dimesion Unit Cutting Strip Steel Technical information Packing

Available dimesion

Specification

SPEC
THICKNESS	0.1 ~ 4.0 mm
WIDTH	5.0 - 450 mm
HARDNESS	HV 300 ~ 600
STRUCTURE	Bainite, Tempered Martensite
HARDNESS TOLERANCE	± HV 20 (Special ± HV 10)
STRAIGHTNESS	Max 0.5mm / 1,000 mm length
CROSS CAMBER	Max 3㎛ / mm Width (Special Max 1㎛/ mm Width)
SURFACE COLOR	Unpolished blue, Bright, Polished blue, Polished white, Polished yellow
EDGE FINISH	Slit edge, Deburred edge, Round edge, chamfered edge, Square edge
INNER DIAMTER	MIN. 300 ~ 600mm
OUTER DIAMETER	MAX. 1,800mm

Unit Cutting Strip Steel

Specification

SPEC
THICKNESS	0.5 ~ 2.0 mm
WIDTH	10 ~ 100 mm
STRAIGHTNESS	Max 0.5mm / 1,000mm length
CROSS CHAMBER	Max. 3㎛ / mm Width (Special Max. lum / mm Width)

Specification for Oscillating

SPEC
THICKNESS	~ 2.0 mm
WIDTH	~ 70 mm

Technical information (Tolerance of form)

Packing

Specification

SPEC
IN DIA METER	400 ~ 510 mm
OUT DIA METER(MAX)	~ 2,000 mm
WEIGHT (MAX)	~ 2,000 kg
REMARK	In coil, Wrapped

PRODUCTS

페이지 로케이션

HARDENED & TEMPERED STRIP STEEL

HARDENED & TEMPERED STRIP STEEL

Carbon tool steel product

Carbon steel product

Alloy tool steel product

Spring steel product

Strip Steel for Automobile Industry

Specification

Application

Strip Steel for Saw Blade/Others

Specification

Microstucture

Application

Shaving Strip Steel

Edge finishing the right edge for every application

Available dimesion

Specification

Unit Cutting Strip Steel

Specification

Specification for Oscillating

Technical information (Tolerance of form)

Packing

Specification